Menu
0
0

Your Cart is Empty

Pennant Primer - System Three Resins
Pennant Primer - System Three Resins
Pennant Primer - System Three Resins
Pennant Primer - System Three Resins
Pennant Primer - System Three Resins
Pennant Primer - System Three Resins
<iframe src="https://player.vimeo.com/video/210633103" webkitallowfullscreen="" mozallowfullscreen="" allowfullscreen="" height="360" frameborder="0" width="640"></iframe>

Pennant Primer

$ 64.95 - $ 539.95

Pennant Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for most commonly available marine topcoats.

Description

Pennant Primer

Pennant Primer is a waterborne, two-component epoxy-polyamide primer. It contains no harmful solvents and cleans up with water. It bonds tenaciously to most clean, sanded surfaces, while providing a friendly surface for water and solvent based topcoats.

For marine applications, the Pennant Primer can be applied above or below the waterline. Pennant Primer will also seal fairing or other filler work before top coating.

Features

• Clean up with water

• No flammable solvents

• Low odor

• Fully cures in 72 hours

• Easy to use

• Compatible with most topcoats on the market today

Properties

Mix Ratio

Mix Ratio by Volume: 1:4
Mix Ratio By Weight: 19:100
(resin:hardener)

Minimum Application Temperature

Minimum Application Temperature: 55°F (13°C)

Pot Life

Pot Life @ 70°F(21°C): 3 hours

Shop Finishing Products
Marine Spar Varnish from $ 49.95
Pennant Primer from $ 64.95
Bloxygen $ 14.95

Finishing FAQ

Often times, if the existing coating simply needs a boost of luster, it is not necessary to remove the existing coating completely. Sanding and cleaning are typically all that is required prior to applying a fresh coat of System Three epoxy or paint.

Keep in mind that the adhesion of a fresh coat of epoxy or paint is only as strong as the existing coating is on the substrate. So if it appears the existing coating is lifting or looks compromised in any way, you should consider stripping it back down to the substrate.

Pennant Topside Paint is designed to be applied over Pennant Primer for marine topside applications. If another manufacturer's topcoat is being used, testing on some scrap material is recommended to ensure you are satisfied with the results. It is also a good idea to perform an adhesion test before making your decision.

Pennant Topside Paint bonds tenaciously to unsanded Pennant Primer. If necessary, sand Pennant Primer to remove defects that would otherwise telegraph through to the topcoat.